Where to buy phantom insecticide

As we start out you can see that the bottle has as most do a measuring reservoir with lines that show you how much solution you may be looking to get for your particular labels needs. When you go to measure this, rather than tilting one direction or the other you're going to rotate away from you and around to allow the solution to move from the main chamber of the bottle over into the measuring reservoir.

Once you've got the correct amount of solution that you need for your label, then you can move on to adding it to your sprayer tank. Now if you happen to get too much in your measuring reservoir for what you're needing, you want to tilt that bottle back to the left just slightly and allow some of that solution to move back into the tank. The same thing applies if you didn't get enough the first go around: you can tilt that bottle around again, add some more solution to the reservoir and get it right where you need.

Once you've got the amount that you need for your sprayer, you're going to remove the lid from the measuring chamber side only. Now instead of pouring to a hard angle into your sprayer with these bottles is best to go at a slight angle away from you. This is going to help make sure that only the solution in the measuring chamber is going into your tank and more of the solution from the main area of the bottle is not rolling up behind and having you measure more than you intend it to.

So we're going to go at a slight angle away to get all that solution in there and then now you're good to go. If your particular label calls for more solution than what the measuring chamber provides, you can always put the lid back on and rotate the bottle again.

If not, we're going to put the lid back on and securely store it. And you should be all set for the tip and pour application. Now we're going to move on to the squeeze and pour With the squeeze and pour bottle you want to make sure that you've removed both lids and checked for seals underneath them. I've gone ahead and removed the seals in this case. This is going to help to make sure that the airflow for the squeeze and pour is going to work correctly as it acts somewhat as a vacuum as you squeeze the bottle to push the chemical into the measuring chamber.

Once you've got it ready and you've removed the seals, you can remove the lid from the measuring chamber side and then you will slightly squeeze your bottle and you'll notice that the solution is going to run from the bottom of the bottle here up the straw and into your measuring reservoir.

We're going to do this gently you don't want to squeeze too hard to have the chemical come out too quick. Once you get the solution to the level that you need - and you may have to do this a couple of times to get that flow going and get those air bubbles to release So I had to push the bottle back a little bit just like you might do with a average 2-liter bottle or anything like that.

You want to get that air flow going then you can squeeze again and more of that solution will run up into your measuring reservoir once you get the amount you need which in this case we're going to run to the half ounce line on this particular bottle. You can pour it directly into your spray tank and you don't have to worry about any extra mess or anything rolling from the rest of the bottle into it since you're controlling that as you squeeze the bottle.

Once you're done, you'll replace that lid back on the bottle and then fill your sprayer the rest of the way with water and continue with your treatment. If you have any questions, as always you can contact our customer service staff and if you like this video be sure to head over to our channel give it a thumbs up, hit that subscribe button, and check out our other DIY and how-to videos.

Thanks for watching! For termite treatments, use 4 gallons of 0. For pre-construction treatment to be covered by concrete slab, use 1 gallon of 0. Apply using a coarse spray nozzle and low-pressure spray less than 25 psi. See our article How to Do a Termite Treatment for more details on liquid termite treatments. Phantom may be converted to a foam for treatments in structural voids. Foam applications to voids above soil should be done with a wet foam expansion ratio or less.

See mixing table on the product label for dilution rates. For general pest control indoors, applications should be made to breeding areas, nesting sites, hiding places, runways, and other places where pests are found or likely to infest. For use with only low-pressure directed spray application equipment. Use a 0. Do not apply more than once every four weeks.

Cockroaches: Phantom is effective against American, Asian, brownbanded, German, Oriental, smokybrown, and other cockroach species. Apply dilution as a coarse, low pressure spot or crack and crevice spray to areas where these pests normally inhabit or are likely to infest. Limited spot treatment of Phantom dilution can be made to surfaces beneath cabinets, spaces between equipment or expansion joints, surfaces behind sinks, lockers, water pipes, cabinets, or other areas where cockroaches may hide.

Reapply, if needed, every 4 weeks or more. Ants: Phantom is highly effective against household and structure-invading ants, including the following species: acrobat ants, Argentine Ants, Carpenter Ants, odorous house ants, pavement ants, Pharaoh's ants, pyramid ants, and other species.

Apply crack and crevice or spot treatments of a 0. Where possible, apply Phantom directly to ant nest s or nesting site s or ant-infested wood or structural voids. Bed bugs: Do not make surface applications to mattresses. Mattress treatments must be confined to the seams, folds and edges only. Remove linens and wash before reuse. Allow to dry before remaking bed. Use an approved product for other treatment areas. Not recommended as the sole protection against bed bugs. Exterior application of Phantom is limited to spot and crack and crevice treatments where pests enter around doors, windows, eaves, attic vents, and holes in exterior walls where utilities enter.

Apply a maximum of 1. Average Customer Rating See all customer reviews ». Great Product, works well on ridding bed bugs. This product is not messy and leaves not build up or residue. Was this review helpful to you? Yes No. I have used this product every spring for a number of years; simply spray around the outside foundation of the house and we are ant and insect free for the entire season.

A trick we learned from one of the expensive exterminators we hired to get rid of carpenter ants. This stuff freed me from Bed Bugs. It's worth every penny and them some. It works great. All crawlers scattered and were not seen by that night. None seen next day and I am still looking without finding any insects crawling. Great stuff!!!!! We have had an opportunity to use the product, and have found it to be very effective so far.

We were being bombarded by carpenter ants, and the little black ants but after treating with Phantom termiticide we seen them no more. Phantom works through a process called delayed action mortality. Because termites don't die immediately upon contact with Phantom, they have the opportunity to distribute the termiticide to their nestmates.

They also die away from the Phantom Perimeter, eliminating the potential for accumulated corpses that would drive other termites away from the treated area.

Phantom is also labeled for control of general household pests inside both residential and commercial structures. Essentially, Phantom will have a deleterious effect upon all insects that have behavioral patterns which allow trafficking through the treated area.

In this respect, Phantom has been proven to be highly effective on both cockroaches and ants. In stock. SKU I Add to Cart. Add to Compare. For use in: indoors and outdoors Phantom has the ability to kill pests that have not come in contact with the treated area.

Skip to the end of the images gallery. Skip to the beginning of the images gallery. Phantom Termiticide Phantom Termiticide- Insecticide is a non repellent insecticide Termites, ants and roaches don't know it is there! For use in: indoors and outdoors Phantom's "Secondary Kill" Action Phantom has the ability to kill pests that have not come in contact with the treated area. All registered users can post a new review. Average 5 out of 5 Quality 4.

Yes No Total Yes: 1 No:0 You have to make sure you don't apply any other product after initial application that is a repellant because it will completely defeat the purpose of using a non-repellant such as this. Now I treat indoors every 60 days to control all different types of crawly critters. No problems whatsoever.

Yes No Total Yes: 1 No:0 We were being bombarded by carpenter ants, and the little black ants but after treating with Phantom termiticide we seen them no more. Also in the past we used the Demand CS against an invasion of German Roaches and it was also very effective. It's a very good product, and will continue to use it. So glad I could purchase it online. It last longer and gets rid of ALL unwanted house pest.

There is no product out there better. All of my purchases have been good products and they arrived packaged well. Love this web site. Saved me a lot of grief and money. People in my community complain about ants, roaches, palmetto bugs, fire ants, sand fleas to mention a few. I had ants and roaches three years ago when I moved there and it seemed an impossible task to control them. Then I discovered Phantom, and everything changed. I spray around the perimeter, inside and outside , and under the home where I have access twice a year, and soak any ant hills with the standard mixture when they appear.

I am virtually insect free year round, while neighbors still complain. And as a sidebar, I seldom see geckos no bugs, no food, no geckos. One caveat, it was starting to fail, I noticed some ants, resprayed, and after a few days still had ants. After research found the product has a life span of years.

Ordered new, problem back under control. No problem so far. It is good and unique product. Everything should work as it did for us. It works for bedbugs. I like it.